Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Draytek 2820 port 443 not responding

Posted on 2013-02-05
6
807 Views
Last Modified: 2013-03-11
Hi,
I want to do a port forward for port 443 to a specific internal ip - fairly straightforward generally speaking, but -its not responding. The port forward is enabled - The management interface ports are totally different so there is , or should be no clash there.

other than put the port in an ip address not sure what else I should do - cant telnet to the ip on port 443  -so - looking for some advice please

thanks
0
Comment
Question by:pabby0612
  • 3
  • 2
6 Comments
 

Author Comment

by:pabby0612
ID: 38856111
Hang on....the internal ip address thats being forwarded to -does it need to have the router that the forwarding is set  - as its own default gateway? Thanks
0
 
LVL 14

Expert Comment

by:BlueCompute
ID: 38857591
Did you configure the port forwarding rule under NAT > Open Ports , or NAT > Port Redirection?

Is the device you're forwarding to a windows machine?  If so, firewall.

The default gateway on the server is irrelevant, it just needs to  be on the same physical network segment (and the correct IP and subnet...)
0
 
LVL 14

Expert Comment

by:plug1
ID: 38858536
"Hang on....the internal ip address thats being forwarded to -does it need to have the router that the forwarding is set  - as its own default gateway? Thanks"

Yes if it isn't then its responses will be sent to what ever gateway it has set.

The default gateway on the server is irrelevant, it just needs to  be on the same physical network segment (and the correct IP and subnet...)

Incorrect.
0
Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

 
LVL 14

Expert Comment

by:BlueCompute
ID: 38858880
Ooops. Plug1 is, of course, correct.

Sorry.
0
 

Accepted Solution

by:
pabby0612 earned 0 total points
ID: 38961002
HI Sorry for delay - I cant do this anymore - due to the gateway needing to change -which cant happen due to some other stuff which is too long winded to go into...bottom line - I cant change this gateway at the moment - so I have to call the whole thing off for now - thanks for your  advice - I am a big fan of experts-exchange and will be back again soon, no doubt!
0
 

Author Closing Comment

by:pabby0612
ID: 38972982
project called off and so answers no longer required
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Granting full access permission allows users to access mailboxes present in their database. By giving full access permission one can open and read the content of any mailbox but cannot send emails from that mailbox.
Easy CSR creation in Exchange 2007,2010 and 2013
In this video we show how to create a Distribution Group in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Recipients >>…
The basic steps you have just learned will be implemented in this video. The basic steps are shown to configure an Exchange DAG in a live working Exchange Server Environment and manage the same (Exchange Server 2010 Software is used in a Windows Ser…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question