Solved

Firewall with built in wan acceleration

Posted on 2013-02-05
5
200 Views
Last Modified: 2013-04-08
Hello,

I was just wondering, does any one know of SMB (priced...) firewalls with WAN acceleration built-into the firewall?

Thanks,
josef
0
Comment
Question by:joebilek
  • 3
  • 2
5 Comments
 
LVL 16

Expert Comment

by:choward16980
ID: 38856939
Read
http://o-www.sonicwall.com/us/en/products/WXA_Series.html

Buy
http://www.firewalls.com/firewall/sonicwall-wan-accelerator/wxa-2000

PS.  A budget would be more valuable.  SMB doesn't really signify what you're capable of spending to solve.
0
 
LVL 1

Author Comment

by:joebilek
ID: 38856949
Hi, SMB means small medium businesses:) not so much money, but we can surely spend some.

any more models except Sonicwall?

thanks.
josef
0
 
LVL 16

Expert Comment

by:choward16980
ID: 38862607
Pfsense is an open source solution that can be used in accordance with SQUID to perform many of the WAN acceleration functions.
0
 
LVL 1

Accepted Solution

by:
joebilek earned 0 total points
ID: 38916195
There does not seem to be a HW solution within SMB money reach that is not open source.

Josef
0
 
LVL 1

Author Closing Comment

by:joebilek
ID: 39057470
No solution found to the need.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We sought a budget ($5,000) firewall solution that would provide all the performance we needed with no single point of failure.  Hosting a SAAS web application in our datacenter, it was critical that we find a way to keep connectivity up and inbound…
Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question