Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

NAT Server resolves duplicate global addresses

Posted on 2013-02-05
1
205 Views
Last Modified: 2013-02-15
having

local address : 192.168.0.1
global address : 200.100.10.1

but thinking of 200.100.10.1 might have a duplicate one across the entire global network,

trying to know the way NAT server resolve it,
0
Comment
Question by:doramail05
1 Comment
 
LVL 3

Accepted Solution

by:
rhukat earned 500 total points
ID: 38871233
You can check the details of the public IP via http://www.ip-adress.com/ip_tracer/200.100.10.1
You can check this for knowing more on NAT http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
DHCP Failover Relationship caveats 6 117
OSPF Question 12 64
assessment of laptops/desktops for hardware refresh 6 82
How can I measure the quality of my Internet access? 2 72
So, you're experiencing issues on your network and you've decided that you need to perform some tests to determine whether your cabling is good.  You're likely thinking that you may need to spend money which you probably don't have on hiring/purchas…
This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question