• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 211
  • Last Modified:

Cisco Equipment

I have a Cisco WLC 4402 and 1142N access points. I have the APs joined to the WLC, but I can't get any devices to connect to the APs. From what I have seen from searches, I think that series controller needs to have a RADIUS server in order for devices to authenticate. Can anyone shed light on this? Thank you.
1 Solution
Craig BeckCommented:
You don't 'need' a RADIUS server if you want to use a passkey to connect.

On the WLC, go to the WLAN page, click on the number next to the SSID you want to configure, click on Security then make sure either WPA or WPA2 is ticked, and you choose PSK from the authentication methods below.
LanMan6401Author Commented:
That worked just fine. I must have passed over that option. Thank you
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now