Solved

Router Cisco 2600: Password

Posted on 2013-02-07
1
623 Views
Last Modified: 2013-02-07
Hi,

This is for Router Cisco 2600.

I use the HyperTerminal: Start >All Program > Accessories > Communications > HyperTerminal

Connect Using Com2

In the Com2’s properties, I click “Restore Default”. I change the “Flow Control” as Xon/Xoff

It is connected to the above Router

It prompts:

R1>enable
Password:

Problem: I forgot the password. How to reset the password?

Thanks,
tjie
0
Comment
Question by:tjie
1 Comment
 
LVL 19

Accepted Solution

by:
helpfinder earned 500 total points
ID: 38863592
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
WiFi Routers with Guest Network capability 14 73
Connecting Servers to L2 OR L3 Switch 6 46
Disabling SNMP Write-Access on Switches 6 28
Dlink-DIR 816 router 4 20
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question