Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Looking for a small inexpensive easy to use router

Posted on 2013-02-07
3
253 Views
Last Modified: 2013-02-13
I have a machine that gets deployed to other companies networks.  Currently the machine cannot run on a 192.168.100 or a 192.168.2 network.  I am looking for a low cost solution to NAT behind someones network and still be able to access the internet.  My assumption is a small router but wanted some recommendations.

Thanks
Brian
0
Comment
Question by:bmcdowell540
3 Comments
 
LVL 20

Expert Comment

by:agonza07
ID: 38865288
0
 
LVL 10

Accepted Solution

by:
koudry earned 500 total points
ID: 38870984
What is your WAN technology, i.e. Ethernet, ADSL, Serial etc.?

Cisco 800 series, could be what you need. With the right IOS, you can do all sort of things.

If you can spend a little bit more, the Cisco 1900 could be another option.

see also:
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_Data_Sheet.html

http://www.cisco.com/en/US/products/ps10538/prod_models_home.html
0
 
LVL 1

Author Closing Comment

by:bmcdowell540
ID: 38886427
Thanks for your help.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question