Link to home
Create AccountLog in
Avatar of Tony Giangreco
Tony GiangrecoFlag for United States of America

asked on

Setting up a test server running VM ESXI 5.0

I'm setting up a test server running VM ESXI 5.0. I've installed ESXI 5.0 and configured the network so it connects to my router. I inserted a Win 2008 r2 cd in the dvd drive and I've connected to the vm host (PE2950 server) from a  Pc in the network. I logged into the VM host with the client on my Pc and created the 1st VM for Windows 2008 R2/64 and inserted the DVD in the drive.

I started the VM but can't find the proper set of selections to connect the DVD to VM1 so I can install the 1st VM's OS.

Your suggestions are appreciated.
ASKER CERTIFIED SOLUTION
Avatar of dmwynne
dmwynne
Flag of United States of America image

Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
See answer
SOLUTION
Avatar of Andrew Hancock (VMware vExpert PRO / EE Fellow/British Beekeeper)
Andrew Hancock (VMware vExpert PRO / EE Fellow/British Beekeeper)
Flag of United Kingdom of Great Britain and Northern Ireland image

Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
Avatar of Tony Giangreco

ASKER

Attached are three screen prints. Let me know what I should do after viewing them.
Summary.jpg
VM1-HardwareDevices.jpg
VM1-Console.jpg
SOLUTION
Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
SOLUTION
Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
I checked it and it's already set to Boot into Bios. Attached is a screen print
VM1-BootSettings.jpg
Actually you need to check the box under Force BIOS setup ;  the next time the vm boots...
SOLUTION
Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
I found the solution myself.

I had to send a CTL-ALT-DEL to the vm after connecting the dvd. Now it's installing.

Thanks for all your suggestions. I will keep them close and review them as I experiement with VM.