itemc
asked on
Vmware ESXi unknown inaccessible
Hi Experts
I am experiencing a problem, we have a server with raid 5 with one disk that went bad, when the tech changed the hard drive he went back into the raid configuration and I guess added the drive ( Yes he should not have touch the configuration)
Anyway now when we go into vsphere I get The VMWARE ESX 4.10 Server does not have persistent storage, I look at the configuration tab and under data store, it is blank. I have tried re scan all but nothing has come up.
But under devices I see the hp attached hard drive with the VMFS partition.
Also when I go into VMware console and use the command disk -l I see my VMFS.
I have tried so far click on create a data store and it and select the HP Hard drive and I have tired both the keep existing signature and the assign a new signature  both time it says this disk already has a VMFS datastore and I cannot go ahead.
I am at a complete lost and have search the web have not found my solution.
Also have rebooted my server multiple time and restarted management console no luck.
There has to be a way to attach this vmfs to my vsphere console so I can have access to my Virtual machines.
I am experiencing a problem, we have a server with raid 5 with one disk that went bad, when the tech changed the hard drive he went back into the raid configuration and I guess added the drive ( Yes he should not have touch the configuration)
Anyway now when we go into vsphere I get The VMWARE ESX 4.10 Server does not have persistent storage, I look at the configuration tab and under data store, it is blank. I have tried re scan all but nothing has come up.
But under devices I see the hp attached hard drive with the VMFS partition.
Also when I go into VMware console and use the command disk -l I see my VMFS.
I have tried so far click on create a data store and it and select the HP Hard drive and I have tired both the keep existing signature and the assign a new signature  both time it says this disk already has a VMFS datastore and I cannot go ahead.
I am at a complete lost and have search the web have not found my solution.
Also have rebooted my server multiple time and restarted management console no luck.
There has to be a way to attach this vmfs to my vsphere console so I can have access to my Virtual machines.
What does actually RAID configuration utility say about this drive? And the RAID itself, is it still shown as a single RAID5 or are there more RAIDs configured?
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
RAID can be reconfiugred using RAID Reconstructor as well www.runtime.org
ASKER
IT work and I was able to get my one VM machine that I needed off the system
Thank you
Thank you