troubleshooting Question

Cisco ASA 5510 VLAN Configuration

Avatar of davidhyunoh
davidhyunoh asked on
Hardware Firewalls
1 Comment1 Solution679 ViewsLast Modified:
I've configured my ASA 8.2 (3) with the following initial configuration:

eth0/3 - no ip address, administratively up
eth0/3.300, ip address 192.168.101.1 255.255.255.0, administratively up

i ran a no shut on the eth0/3.300 subinterface but im not getting a ping on the 192.168.101.1 gateway even though I'm on the subnet.  

Am I missing anything?
ASKER CERTIFIED SOLUTION
Jimmy Larsson, CISSP, CEH
Network and Security consultant

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 1 Comment.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 1 Comment.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros