BDS Admin Tools
Can someone confirm if the server address must be right in order to manage the server?
If so, what should it be?
I have tried the local server.domain.local
BDS-Tools.jpg
If so, what should it be?
I have tried the local server.domain.local
BDS-Tools.jpg
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Are you using BES?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
New BES10.
Thanks, i have read this a number of times. Still none the wiser.
Issue i have with this is unable to register devices OTA. Wired is fine via WDM.
So i was going to try and install the admin tools for BDS but stuck here too.
Thanks, i have read this a number of times. Still none the wiser.
Issue i have with this is unable to register devices OTA. Wired is fine via WDM.
So i was going to try and install the admin tools for BDS but stuck here too.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Change the server name, domain and port. In my case the port is 444
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Do you use a mail server? ie exchange?
ASKER
Yes, exchange.
Go in to ESM and Default SMTP Virtual Server Properties’->’Advanced’
Check the DNS name and see if it resolves. That should be the server.
Otherwise i am not sure i can help to much further :(
Check the DNS name and see if it resolves. That should be the server.
Otherwise i am not sure i can help to much further :(
ASKER
THink some of you are confused?! I'm just trying to install the BDS tools...
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
We will use activesync....
Where do you mean for:
Go in to ESM and Default SMTP Virtual Server Properties’->’Advanced’
Where do you mean for:
Go in to ESM and Default SMTP Virtual Server Properties’->’Advanced’
In Exchange system Manager.
Go to Default SMTP server.
Right-click.
Properties.
Delivery.
Advanced.
And it displays your server DNS name (FQDN) and you can hit "check".
I was presuming this would be the DNS server name you were looking for in your screenshot.
Go to Default SMTP server.
Right-click.
Properties.
Delivery.
Advanced.
And it displays your server DNS name (FQDN) and you can hit "check".
I was presuming this would be the DNS server name you were looking for in your screenshot.
ASKER
I'm running Exchange 2010.
ASKER
Got ActiveSync up and running and managed to get the playbook registered albeit using wireless not OTA>
Have also installed standalone BES10 router, but can test this as yet as no more devices to hand..
Have also installed standalone BES10 router, but can test this as yet as no more devices to hand..
ASKER
So this is for exchange or BDS?