Solved

Exchange 2013 issue

Posted on 2013-05-09
1
254 Views
Last Modified: 2013-05-27
i have recently implemented Exchange 2013 with HyperV setup.

there are 3 physical servers (one DC and other two exchange 2013 with OS win 2012).

the 2 exchange servers are configured as below:

1) exch server1 - in this i have created 2 virtual servers - one virtual server for mbx role and other virtual server for cas role.
2) exch server2 - in this i have created 3 virtual servers - first one for DC, second one for mbx role and third cas role.

exch server1 and exch server2 are confgiured with high availability and is working fine.

since yesterday i have noticed that in exch server1 the first virtual server running mbx role is having messages in queue and status is "retry" in exch toolbox queue viewer whereas in exch server2 the same status is "ready".

the event id found in first case is 1177.

also when i do "telnet 192.168.1.167 25 (ip address of first mbx virtual server) it is not connecting but it connects when i do "telnet 192.168.1.168 25 (ip address of second virtual mbx server)


(DC's are configured with NLB)

any idea as this is a very new implementation
0
Comment
Question by:kurajesh
1 Comment
 
LVL 8

Accepted Solution

by:
Dipak earned 500 total points
ID: 39154552
EVENT ID 1177 denotes that the Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.

Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.

Make sure your first server has proper network connectivity and which can be access from outer network.
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This process describes the steps required to Import and Export data from and to .pst files using Exchange 2010. We can use these steps to export data from a user to a .pst file, import data back to the same or a different user, or even import data t…
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
In this video we show how to create a Resource Mailbox in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: Navigate to the Recipients >> Resources tab.: "Recipients" is our default selection …
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now