Solved

TS Gateway connecting to TS with multiple RDP host connections

Posted on 2013-05-12
2
279 Views
Last Modified: 2013-08-27
Looking at using TS gateway on SBS 2011 for use with a Terminal server. With the terminal server, Im looking at creating two RDP connections for it, one for internal use - team 3 NICS. (24 bit colour depth, and no session printers), and the other for external use  - 1NIC (16bit, session printers). How do I configure this for TS gateway then? So when a person using a laptop internally, TS gateway will direct them to the Internal RDP connection, and when they use TS Gateway at home, is uses the other RDP connection, lowering the colour depth and creating session printers? thoughts?
0
Comment
Question by:greentriangle
  • 2
2 Comments
 
LVL 20

Assisted Solution

by:wolfcamel
wolfcamel earned 500 total points
ID: 39160174
you could simply have two rdp settings saved to the desktop of the laptop with the settings configured appropriately
0
 
LVL 20

Accepted Solution

by:
wolfcamel earned 500 total points
ID: 39160176
also - the "internal" one could go direct to the terminal, rather than via the gateway - that way if they try to use that one from home it wont work.

and If you use an external address such as remote.domain.com, and make sure it isn't internally resolvable - then they wouldn't be able to use the external one from in the office.
0

Featured Post

Do You Know the 4 Main Threat Actor Types?

Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

Join & Write a Comment

Possible fixes for Windows 7 and Windows Server 2008 updating problem. Solutions mentioned are from Microsoft themselves. I started a case with them from our Microsoft Silver Partner option to open a case and get direct support from Microsoft. If s…
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now