Install License on Cisco 1921 with USB

Experts,

When I attempt to copy with the following commands I get the following error:

(destination path is identical)

yourname#cop usbflash0: fla
yourname#cop usbflash0: flash:
Source filename [usbflash0]? FCZ1716933D_20130513014106144.lic
Destination filename [FCZ1716933D_20130513014106144.lic]?
%Error copying usbflash0:/FCZ1716933D_20130513014106144.lic (destination path is identical)
yourname#

please post the output of a "dir flash0" and "dir usbflash0".

Hi don, thanks for responding, please see below:

yourname#dir flash:
Directory of usbflash0:/

    1  -rw-    68831808  Apr 18 2013 03:21:44 +00:00  c1900-universalk9-mz.SPA.152-4.M3.bin
    2  -rw-        3064  Apr 18 2013 03:31:18 +00:00  cpconfig-19xx.cfg
    3  drw-           0  Apr 18 2013 03:31:30 +00:00  ccpexp
  239  -rw-        2464  Apr 18 2013 03:33:12 +00:00  home.shtml

255537152 bytes total (184524800 bytes free)
yourname#

Directory of usbflash0:/

    1  -rw-    68831808  Apr 18 2013 03:21:44 +00:00  c1900-universalk9-mz.SPA.152-4.M3.bin
    2  -rw-        3064  Apr 18 2013 03:31:18 +00:00  cpconfig-19xx.cfg
    3  drw-           0  Apr 18 2013 03:31:30 +00:00  ccpexp
  239  -rw-        2464  Apr 18 2013 03:33:12 +00:00  home.shtml

255537152 bytes total (184524800 bytes free)
yourname#

As you cann see their both same

You've got your USB flash mapped as the bootflash.

Try using usbflash1 as the source.  Or do a "dir usbflash1" and see if that's where it is.

Thanks again for responding.

I don't have usbflash1, see below:

yourname#dir ?
  /all             List all files
  /recursive       List files recursively
  all-filesystems  List files on all filesystems
  archive:         Directory or file name
  cns:             Directory or file name
  flash:           Directory or file name
  null:            Directory or file name
  nvram:           Directory or file name
  system:          Directory or file name
  tar:             Directory or file name
  tmpsys:          Directory or file name
  usbflash0:       Directory or file name
  xmodem:          Directory or file name
  ymodem:          Directory or file name
  |                Output modifiers
  <cr>

And when I try to force usbflash1 as the source I get the following error:

yourname#cop usbflash1:?
% Unrecognized command
yourname#cop usbflash1:

:-(

Don,

You're a star. Spot on.

Cheers mate.

Cheers mate.