Solved

H3C WX5004 Wireless Controller

Posted on 2013-05-13
3
940 Views
Last Modified: 2013-05-14
Hello,

We have a H3C WX5004 WLAN controller.  I need to setup a guest network for BYOD on our school wirless network.  Does anyone have a sample config that they would like to share?  We want to use web portal authentication to the wireless network via radius, I can easily figure out the radius end of it, I'm just looking for a sample config to drop the BYOD guests off onto VLAN 10 to keep guest traffic seperate from our existing LAN.  Thanks in advance.
0
Comment
Question by:JacksonR2
  • 2
3 Comments
 
LVL 7

Accepted Solution

by:
avcontrol earned 500 total points
ID: 39164560
You probably would have to go by their manual.......
http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/WLAN/Access_Controller/H3C_WX3000_Series_Unified_Switches/Command/Command/H3C_WX3000_CR-6W103/

I dont think you will find examples.
But before implementing, there should be design in place with some diagrams.
Otherwise will be impossible to support what you trying to achieve.
0
 

Author Comment

by:JacksonR2
ID: 39166120
I think I found an example config.  Once I have verified that is works I will post for others to use. Thanks
0
 
LVL 7

Expert Comment

by:avcontrol
ID: 39166193
Cool. Glad to hear.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Join & Write a Comment

Suggested Solutions

Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
With the purchase of CloudCommand by Comcast customers are left in a bind as subscriptions expire and render the AP's disabled. The following will explain how to flash your Ubiquiti AP's with CloudCommand firmware back to Ubiquiti firmware. HOWTO…
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

24 Experts available now in Live!

Get 1:1 Help Now