Solved

Exchange 2010 SP1 upgrade to SP3

Posted on 2013-05-15
3
527 Views
Last Modified: 2014-11-09
Hey Guys,

I attempted an upgrade to Exchange 2010 SP3 from SP1 (No rollups) and went though the usual install process but came across the error below can anyone help with this problem.

NOTE: DC's are 2008 r2 in 2003 functional level. Exchange Version 14.1 (Build 218.15) single server with all roles on one box.

[05/10/2013 17:47:35.0175] [2] The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=uk,DC=com,DC=local" container object's otherWellKnownObjects attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=domain,DC=uk,DC=com,DC=local" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
[05/10/2013 17:47:35.0175] [2] Ending processing initialize-ExchangeUniversalGroups
[05/10/2013 17:47:35.0175] [1] The following 1 error(s) occurred during task execution:
[05/10/2013 17:47:35.0175] [1] 0.  ErrorRecord: The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=uk,DC=com,DC=local" container object's otherWellKnownObjects attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=domain,DC=uk,DC=com,DC=local" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
[05/10/2013 17:47:35.0175] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Tasks.InvalidWKObjectTargetException: The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=uk,DC=com,DC=local" container object's otherWellKnownObjects attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=domain,DC=uk,DC=com,DC=local" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
[05/10/2013 17:47:35.0175] [1] The following error was generated when "$error.Clear();
      initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions

" was run: "The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=uk,DC=com,DC=local" container object's otherWellKnownObjects attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=domain,DC=uk,DC=com,DC=local" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".".
[05/10/2013 17:47:35.0175] [1] The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=uk,DC=com,DC=local" container object's otherWellKnownObjects attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=domain,DC=uk,DC=com,DC=local" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
[05/10/2013 17:47:35.0175] [1] [ERROR-REFERENCE] Id=443949901 Component=
[05/10/2013 17:47:35.0175] [1] Setup is stopping now because of one or more critical errors.
[05/10/2013 17:47:35.0175] [1] Finished executing component tasks.
[05/10/2013 17:47:35.0253] [1] Ending processing Install-ExchangeOrganization

Thank you in advance,
0
Comment
Question by:Treacher
3 Comments
 
LVL 52

Expert Comment

by:Manpreet SIngh Khatra
ID: 39167330
Hi, Thank you for this article, it helped a lot in my research. One thing I ran into was the group “Exchange All Hosted Organizations” was set to universal, not global, and this caused the SP2 installer to fail.

Just thought I would let you and others know about it.

I was getting the following:

The well-known object entry with the GUID “70bf766e-de1c-4776-b193-758d1306c8fb”, which is on the “CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=org,DC=au” container object’s otherWellKnownObjects attribute, refers to a group “CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=DOMAIN,DC=org,DC=au” of the wrong group type. Either delete the well-known object entry, or promote the target object to “Global, SecurityEnabled”.

http://www.bibble-it.com/2011/12/05/quick-step-by-step-exchange-2010-sp2-install-guide/comment-page-1

- Rancy
0
 

Author Comment

by:Treacher
ID: 39167370
Rancy,

Thank you for your reply.
I have checked and yes my "Exchange All hosted Organisations" is currently set to Universal but so are all the rest of the security groups in "Microsoft Exchange Security Groups". Should I change that one or all and what affect or knock on will this have??

Many Thanks,

Treach,
0
 
LVL 19

Accepted Solution

by:
R--R earned 500 total points
ID: 39167684
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

As with any other System Center product, the installation for the Authoring Tool can be quite a pain sometimes. This article serves to help you avoid making these mistakes and hopefully save you a ton of time on troubleshooting :)  Step 1: Make sur…
This process describes the steps required to Import and Export data from and to .pst files using Exchange 2010. We can use these steps to export data from a user to a .pst file, import data back to the same or a different user, or even import data t…
The video tutorial explains the basics of the Exchange server Database Availability groups. The components of this video include: 1. Automatic Failover 2. Failover Clustering 3. Active Manager
The basic steps you have just learned will be implemented in this video. The basic steps are shown to configure an Exchange DAG in a live working Exchange Server Environment and manage the same (Exchange Server 2010 Software is used in a Windows Ser…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question