Solved

FTP connection for WS2012

Posted on 2013-05-15
2
288 Views
Last Modified: 2013-05-23
I have install Windows Server (WS2012) in Hyper V of Windows 8.  Within the VM, I can connect to the ftp site.  However, I can not connect to the ftp site from the host.  

If I turn off the firewall within WS2012, I can connect from host.

Attached is the ftp in-bound screenshot. It is enable.  What did I do wrong?
firewall.JPG
0
Comment
Question by:tommym121
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 5

Accepted Solution

by:
JHalliday earned 500 total points
ID: 39168649
check your scope settings and make sure you have all the boxes checked also  make sure you have included your hosts IP address/subnet

You may also need to check the hosts firewall as well
0
 

Author Closing Comment

by:tommym121
ID: 39190843
Thanks
0

Featured Post

Major Incident Management Communications

Major incidents and IT service outages cost companies millions. Often the solution to minimizing damage is automated communication. Find out more in our Major Incident Management Communications infographic.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I don't know if many of you have made the great mistake of using the Cisco Thin Client model with the management software VXC. If you have then you are probably more then familiar with the incredibly clunky interface, the numerous work arounds, and …
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question