• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 511
  • Last Modified:

Cisco IP Telephony UC520 - 2

Dear all in experts exchange


We already configure hunt group in cisco uc-520 and it work probably , the aim of the hunt group is to make tow IP telephone ring at the same time for incoming call from outside (from FXO) , now both of the ip telephony can forward call to any IP telephony but they cannot forward call between them self ,  I really need solution so that both the IP telephony in hunt group can forward call between them self and ring at the same time   .

the configuration of the hunt group is as follow :

voice hunt-group 1 parallel
pilot 309
list 201, 205, 206
Final 700
timeout 30



 
ephone-dn  11  dual-line
 number 202 no-reg primary
 label 202
 description India Nagpur
 name India Nagpur
 call-forward busy 400
 call-forward noan 400 timeout 25

To This:
ephone-dn  11  dual-line
 number 202 no-reg primary
 label 202
 description India Nagpur
 name India Nagpur
 call-forward busy 309
 call-forward noan 309  timeout 25



Best regards

Eng . Ziad Ismail Al-Showaiter

CCNA-CCNP , CXFSE , CCDA-CCDP
Network & Electronic Telecom  Engineer
Net Technology - HQ
P.O.Box: 18491, Sana'a - Yemen
Tel: +967  01 446000 , Fax:+967 1 446100
Mobile :+967 735810273 , Email : ziad@netyemen.com
0
ziadalshowaiter
Asked:
ziadalshowaiter
1 Solution
 
arnoldCommented:
A hunt is a list of extensions. You can not forward back into the hunt group, you can forward to an existing extension of the phone.  Presumably each phone has its own primary extension and then shared or other extensions that are part of various groups.

202 seems to be a shared line. Placing the call on hold is the only way to allow the other phone to pick the call up.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now