Solved

HP customized ESXi image and server crash

Posted on 2013-05-17
1
407 Views
Last Modified: 2013-06-01
Dear Experts:

We have HP server HP proliant DL 380 we recently upgraded RAM to 48GB this server is with dual processor, we installed HP customized ESXi image from the below URL http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html 
selected image is :  vSphere 5.1 Feb 2013
We were able to install successfully but after few days the installed Esxi server crash when reboot the attached is the message, please suggest how to fix this .
2013-04-27-13.02.54.jpg
0
Comment
Question by:D_wathi
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 120

Accepted Solution

by:
Andrew Hancock (VMware vExpert / EE MVE^2) earned 500 total points
ID: 39174279
If you have just upgraded the memory, I would check

1. Memory is compatible.
2. Memory is correctly placed.
3. Memory is correctly seated.
4. Run a Memory Check - http://www.memtest.org/
5. Upgrade all firmwares.
6. Esclate a Support Call for possible hardware failure with HP.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Last article we focus in how to VMware: How to create and use VMs TAGs – Part 1 so before follow this article and perform the next tasks, you should read the first article how to create the TAG before using them in Veeam Backup Jobs.
Ransomware is a malware that is again in the list of security  concerns. Not only for companies, but also for Government security and  even at personal use. IT departments should be aware and have the right  knowledge to how to fight it.
Teach the user how to delpoy the vCenter Server Appliance and how to configure its network settings Deploy OVF: Open VM console and configure networking:
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question