Solved

How to migrate Exchange data from SBS 2003 to SBS2011 when POP3 connector is used

Posted on 2013-05-18
3
388 Views
Last Modified: 2013-05-19
We are migrating from SBS2003 to SBS2011
The SBS2003 domain is: mycompany.local
We use the built-in exchange on SBS2003 for 10 mailboxes
The mycompany.com is site is hosted via 1and1.com
We use the POP3 connector to download email to the SBS2003 server
The 10 users access their email via Outlook.

The desired future state is to have this same configuration working on SBS2011.
I have stated the process "Migrate to Windows SES"
From the checklist, I completed the steps:
1. change where to store  data on destination server
2. Configure network

Since I am using an internal domain name, do I need to complete the following task:
-Configure the Internet Address --> Start the internet address wizard.

This wizard seems to be only geared to assist if your domain name is some sort of a mycompany.com address as opposed to the mycompany.local which is what we have.

I think I need to select the option:
I want to manage the domain name myself and then insert: mycompany.com as the domain name as opposed to using mycompany.local
FYI: we receive mail at addresses like: accounting@mycompany.com or bob@mycompany.com
0
Comment
Question by:itplatoon
3 Comments
 
LVL 9

Assisted Solution

by:djsharma
djsharma earned 200 total points
ID: 39177570
0
 
LVL 17

Accepted Solution

by:
WORKS2011 earned 300 total points
ID: 39177617
Since I am using an internal domain name, do I need to complete the following task:
-Configure the Internet Address --> Start the internet address wizard.
yes you need to follow the wizards.

This wizard seems to be only geared to assist if your domain name is some sort of a mycompany.com address as opposed to the mycompany.local which is what we have.
Configure "Internet" address means it's outside your local network so you will configure with .com

I think I need to select the option: I want to manage the domain name myself and then insert: mycompany.com as the domain name as opposed to using mycompany.local
for the internet wizard you are correct (if you get an error please send a screen shot)


FYI: we receive mail at addresses like: accounting@mycompany.com or bob@mycompany.com
active directory during installation of the SBS software uses .local for DNS purposes, it assures local users will not go out into the .com domain and search for computers during logon and things like this. Once the SBS server is configured you then setup the .com domains for outside access.
0
 

Author Closing Comment

by:itplatoon
ID: 39178483
Both postings were helpful and I completed the migration. Thanks.
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In the event you manage a Small Business Server 2003, and you are audited for PCI compliance, there are several changes you must make in order to pass the audit. I can take no credit for discovering any of these fixes or workarounds, but there is no…
Because virtualization becomes more and more common, and, with Microsoft Hyper-V included in Windows Server at no additional costs, and, most server hardware nowadays is more than capable of running a physical Small Business Server (SBS) 2008 or 201…
This tutorial gives a high-level tour of the interface of Marketo (a marketing automation tool to help businesses track and engage prospective customers and drive them to purchase). You will see the main areas including Marketing Activities, Design …
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question