Solved

Server 2008 BSOD

Posted on 2013-05-20
4
516 Views
Last Modified: 2013-07-07
Can someone tell me why my server keeps blue screening?
bsod.zip
0
Comment
Question by:triphen
  • 3
4 Comments
 
LVL 14

Expert Comment

by:Rob Miners
ID: 39183348
You have an IO Error. This means that the data can't be read from your HDD. Please run a HDD diagnostic tool to check your HDD.

BugCheck F4 Probably caused by : csrss.exe
BUGCHECK_STR:  0xF4_IOERR

BugCheck 7A Probably caused by : partmgr.sys
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error


Major Hard drive manufacturers :

Hitachi / IBM
Fujitsu / Toshiba
Seagate / Samsung
Western Digital
0
 

Author Comment

by:triphen
ID: 39183352
Quick CHKDSK returns this:


 487735295 KB total disk space.
  29187484 KB in 78946 files.
     57208 KB in 22600 indexes.
         0 KB in bad sectors.
    769939 KB in use by the system.
     65536 KB occupied by the log file.
 457720664 KB available on disk.

I will try the MFG utilities.
0
 

Accepted Solution

by:
triphen earned 0 total points
ID: 39295095
Dell recommend I upgrade the firmware on the controller. So far no issues :)
0
 

Author Closing Comment

by:triphen
ID: 39305107
Called Dell tech support
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now