Solved

Engenius Access Points

Posted on 2013-05-21
2
410 Views
Last Modified: 2013-06-16
Hi
     I have approximately 2 outdore and 5 indore engenius access points installed at home .

ENH200EXT= OUTDORE (2)
EAP350 =INDORE (5)

Now I am facing an issue if disconnection of access points if I travel from one place to another with in the wifi network ( as it gets disconnected and reconnects with the new access point ) the flow is not smooth.
kindly help me out with the same .
0
Comment
Question by:sanjeevkmrs
2 Comments
 
LVL 25

Accepted Solution

by:
Fred Marshall earned 500 total points
ID: 39184724
It depends on whether there is consistent continuous coverage or not.  If not, then there will be dropouts as you move around.

It depends on the wireless software on your computer.  Some may switch faster than others.

Consider that in order to switch, the computer has to decide that the original signal is no longer viable.  Does that require a dropout or is it based on signal to noise ratio in a consistent continuous coverage situation?

So, it's not clear what kind of help is possible unless there are answers to all these questions.  And, none of these questions are easy to address...

Maybe more specifics??
0
 

Author Closing Comment

by:sanjeevkmrs
ID: 39251139
thanks
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now