Solved

routed link between same vlan

Posted on 2013-05-25
5
265 Views
Last Modified: 2013-06-09
I am studying for my CCNA and I have this scenario. I am not sure if this will work. But I want to get your thoughts.
From the attached network diagram, I cannot have the same vlan separated by a routed link. Correct?
net-diagram.jpg
0
Comment
Question by:leblanc
  • 3
  • 2
5 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 39197561
Correct...

With exceptions. :-)

You could use L2TPv3 to accomplish this.
0
 
LVL 1

Author Comment

by:leblanc
ID: 39197635
Is there a sample config or tutorial? Thx
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 39197640
Yes. There are a number of examples in the link.
0
 
LVL 1

Author Comment

by:leblanc
ID: 39197654
Now the only reason I have this question is because I am running on WCCP between the 3750 and the Websense. The Internet connection is currently connected to the 3750. Now I am moving the Websense and the Internet connection to the 3560. Will l2tpv3 works for wccp to redirect traffic from the 3560 to the Websense? Thx
0
 
LVL 50

Assisted Solution

by:Don Johnston
Don Johnston earned 500 total points
ID: 39197665
Sorry, L2TPv3 is not supported on the 3560.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now