NEXUS PORT CHANNEL CONFIG

Would this be an appropriate configuration for a port channel on a Nexus 5548.   Is the Spanning Tree info required??

interface port-channel215
  switchport mode trunk
  switchport trunk allowed vlan 501-503,601-602
  spanning-tree port type edge
  spanning-tree bpduguard enable
  vpc 215
sectelAsked:
Who is Participating?
 
Don JohnstonConnect With a Mentor InstructorCommented:
Well, you don't (have to put all the configurations on the port-channel interface). The configuration (L2 and up) is inherited by the port-channel interface when the channel-group command is applied to the physical interface.
0
 
Don JohnstonInstructorCommented:
Would this be an appropriate configuration for a port channel on a Nexus 5548.  Is the Spanning Tree info required??
Could be.  If this is going to a server, yes. But if it's connecting to another switch, the spanning-tree port type edge, could be a problem.
0
 
sectelAuthor Commented:
Yes...should have mentioned that.  I was curious as to why you have to be so detailed with the Port channel config when infact all this info is also on the physical port
0
All Courses

From novice to tech pro — start learning today.