Solved

Cisco Router Incurring OSPF Issues: Dead Timer Expired, Too Many Retransmissions

Posted on 2013-05-28
2
1,248 Views
Last Modified: 2013-06-14
Hello Experts,

Can someone please help shed some light on why we're getting so many OSPF errors surrounding dead timers, Too many retransmissions, and Ignore timer expired?

The errors appear on our Tunnel 0 interfaces.

I have checked the Tunnel neighbour interfaces for any mismatches and everything appears to be ok.

I have attached the configs.

This is a rather major issue here at work, so your expeditious help will be greatly appreciated.

Cheers
Hub-Router.txt
Spoke-Router.txt
0
Comment
Question by:cpatte7372
2 Comments
 
LVL 20

Accepted Solution

by:
rauenpc earned 500 total points
ID: 39202597
I think the hubs need a static multicast map to each other.

https://supportforums.cisco.com/docs/DOC-8356
0
 

Author Closing Comment

by:cpatte7372
ID: 39247104
cheers
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question