?
Solved

How do I allow H.323 through HP Procurve 7102dl?

Posted on 2013-05-28
3
Medium Priority
?
419 Views
Last Modified: 2013-06-10
Hi all :)
 
We have just aquired a Polycom VSX7000 videoconferencing system.
 
Can someone tell me what I need to do to our procurve router to allow the H.323 traffic to pass through? Currently it is not being allowed. I can dial and connect to external sites using the remote sites IP but I don't get any sound or picture
 
thanks
Tracy
0
Comment
Question by:tracyprier
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 37

Expert Comment

by:ArneLovius
ID: 39205321
Are you running NAT on the router ?
0
 

Author Comment

by:tracyprier
ID: 39205920
I did a bit of reading and have set up a NAT to allow TCP 3230 - 3235 and UDP 3230 - 3253.

I still don't get a picture but am connecting to the far end
0
 
LVL 37

Accepted Solution

by:
ArneLovius earned 1500 total points
ID: 39206343
the issue is that like FTP, H323 contains IP addresses in the packets, so you need an ALG (Application Layer Gateway) in the router that can re-write the H323 packets.

depending on what you are connecting to at the far end, you might have some success by enabling NAT mode in the HDX, but this will be determined by the remote endpoint or H323 gateway.
0

Featured Post

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

During and after that shift to cloud, one area that still poses a struggle for many organizations is what to do with their department file shares.
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Suggested Courses

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question