Solved

Enabling syslog id 113019 for firewall reporting

Posted on 2013-05-29
3
1,127 Views
Last Modified: 2013-05-29
I'm having a problem with an ASA 5510 and software from ManagEngine (Firewall Analyzer).  ManagEngine is saying that syslog ID 113019 is not getting data over to the server where the firewall analyzer is installed.  I'm checking the config and I see it enabled in the ASDM.  I could use some help figuring out why this particular syslog info isn't making it to the reporting software when other data is.
0
Comment
Question by:First Last
  • 3
3 Comments
 
LVL 1

Author Comment

by:First Last
ID: 39204601
I had to enable this via the command line, for some reason it did not match what was showing in the ASDM.
0
 
LVL 1

Accepted Solution

by:
First Last earned 0 total points
ID: 39204602
logging message 113019 level 5
0
 
LVL 1

Author Closing Comment

by:First Last
ID: 39204604
Provided own solution
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
adding a printer to QAD 10 62
Failover VPN Question Sonicwall 5 31
Use of vpn-filter value  in S2S VPN 2 29
Help with a subnetting question 7 38
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Concerto Cloud Services, a provider of fully managed private, public and hybrid cloud solutions, announced today it was named to the 20 Coolest Cloud Infrastructure Vendors Of The 2017 Cloud  (http://www.concertocloud.com/about/in-the-news/2017/02/0…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question