Solved

How to check VPN 3000 Concentrator Log.

Posted on 2013-05-30
4
315 Views
Last Modified: 2013-06-06
Dear Experts,
I want to check who is logged in from outside the network through  VPN concentrator.
Thanks.
0
Comment
Question by:ibu1
  • 3
4 Comments
 

Expert Comment

by:wezmo
ID: 39207582
Configuring event logging on the VPN 3000

To enable the Filterable Event Log, select Monitoring > Filterable Event Log.
The log can be filtered by Event Class, Severity, Client IP Address, Group, and/or Direction.
To enable the Live Event Log, select Monitoring > Filterable Event Log > Live Event Log.
There are no filtering options in the Live Event Log. The log does offer options for Pause Display, Clear Display, and Restart.
0
 
LVL 12

Author Comment

by:ibu1
ID: 39210332
Hello wezmo,
We are using radius server windows server 2003 as authentication for the user. Means after connecting to the vpn, the vpn concentrator authenticate user through the user who are part of vpn group in the active directory.So,I how can I filter the event log according to the username.
Regards.
0
 
LVL 12

Accepted Solution

by:
ibu1 earned 0 total points
ID: 39213452
The IAS server in the active directory has event viewer with the event id 1 is all from the vpn concentrator.
0
 
LVL 12

Author Closing Comment

by:ibu1
ID: 39224989
As This is the only solution.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question