Solved

CISCO UC on UCS

Posted on 2013-06-03
14
467 Views
Last Modified: 2013-07-26
i planning to implement VM Cisco UC Virt. Foundation 5.0.  on cisco C220 series and also i receive e-delivery from cisco contain the activation code

may you can help and support to download the VMW software, implementation, deployments

- virtual environment will deploy on three 3 c220 server
- three services will be configure (communication manager, unity, IM and presence )


thanks
0
Comment
Question by:alaamkld101985
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 5
  • 2
  • +1
14 Comments
 
LVL 33

Expert Comment

by:Busbar
ID: 39215508
sorry, what is the question ?!
0
 

Author Comment

by:alaamkld101985
ID: 39215525
OK Fine, how get download and deploy the VMW software ver (Cisco UC Virt. Foundation 5.0) ?
0
 
LVL 33

Expert Comment

by:Busbar
ID: 39215528
you need to purchase VMware separately, unless you are using the free edition which could be downloaded directly from vmware.com
0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 

Author Comment

by:alaamkld101985
ID: 39215539
i already purchase it, and receive the e-license via e-mail
0
 
LVL 33

Expert Comment

by:Busbar
ID: 39215543
for vmware or Cisco, if you mean vmware, register on myvmaware and download the application and use the key to register it.
0
 

Author Comment

by:alaamkld101985
ID: 39215552
thanks for reply, this version of VMware  is exclusive for cisco UCS - unified computing systems  

so, it's not available to download from VMW web portal

any other suggestion from EE, will be appreciate
0
 
LVL 33

Expert Comment

by:Busbar
ID: 39215567
0
 
LVL 33

Expert Comment

by:Busbar
ID: 39215568
everything is available in VMware
0
 
LVL 20

Expert Comment

by:José Méndez
ID: 39216160
How to install ESXi on UCS Servers
https://supportforums.cisco.com/docs/DOC-33350
0
 
LVL 6

Expert Comment

by:mark_06
ID: 39262635
I manage Cisco Unified Communications on UCS as my day job. The VMware platform for UCS is the same as for other servers, I think Cisco might sell the license also, however it's not a special software release.
To deploy CUCM, CUC, CUPS & UCCX you want to use the Cisco OVA templates, they are supported by TAC. http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates)
The OVA will give you the Cisco recommended resource allocation for the servers.

Also do you have a vCenter as part of your license? If so you need to decide on whether to deploy vCenter as a virtual appliance or on a dedicated hardware appliance.

I would recommend vCenter as managing 3 servers separately is a pain.
0
 
LVL 20

Expert Comment

by:José Méndez
ID: 39262928
thanks for reply, this version of VMware  is exclusive for cisco UCS - unified computing systems  

so, it's not available to download from VMW web portal

Did you check the link I posted? The ESXi image is available in vmware.com, and it is a special software release meant for Cisco equipment, therefore it is a separate download than the regular hypervisor link.
0
 

Author Comment

by:alaamkld101985
ID: 39263005
thanks mark_06 for sharing the links

on our new C220 M3 server , how can configure 4 LAN physical and virtual connect
0
 

Accepted Solution

by:
alaamkld101985 earned 0 total points
ID: 39266505
also, how can get OVF templates
0
 

Author Closing Comment

by:alaamkld101985
ID: 39357274
solved
0

Featured Post

Use Case: Protecting a Hybrid Cloud Infrastructure

Microsoft Azure is rapidly becoming the norm in dynamic IT environments. This document describes the challenges that organizations face when protecting data in a hybrid cloud IT environment and presents a use case to demonstrate how Acronis Backup protects all data.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Will try to explain how to use the VMware feature TAGs in the VMs and create Veeam Backup Jobs using TAGs. Since this article is too long, I will create second article for the Veeam tasks.
In this article, I will show you HOW TO: Install VMware Tools for Windows on a VMware Windows virtual machine on a VMware vSphere Hypervisor 6.5 (ESXi 6.5) Host Server, using the VMware Host Client. The virtual machine has Windows Server 2016 instal…
Teach the user how to configure vSphere clusters to support the VMware FT feature Open vSphere Web Client: Verify vSphere HA is enabled: Verify netowrking for vMotion and FT Logging is in place or create it: Turn On FT for a virtual machine: Verify …
This video shows you how to use a vSphere client to connect to your ESX host as the root user. Demonstrates the basic connection of bypassing certification set up. Demonstrates how to access the traditional view to begin managing your virtual mac…

742 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question