Solved

HP Jet Admin - Export & Import Config?

Posted on 2013-06-04
5
317 Views
Last Modified: 2014-02-03
Greetings,

A HP multi-functional (CM6040) which crashed a couple of days ago in our company has just been brought back online, however it has been completely reset to factory defaults.

I wish to use Jet Admin to 1) export the config from another fully configured HP MFP and export this onto the newly restored HP in order to save myself a LOT of time.

Is this possible?

Thanks in advance if anyone can help.  Documentation is hard to find :)

Declan
0
Comment
Question by:deckydee
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
5 Comments
 
LVL 12

Expert Comment

by:Mike
ID: 39220026
0
 

Accepted Solution

by:
deckydee earned 0 total points
ID: 39221245
Firerunt,

Thanks for getting back to me.

This is speaking more about the Jet admin install on the server itself and not the actual config on the MFP.

I am looking for the option to clone/backup the MFP and restore this config onto anonther MFP
0
 
LVL 12

Expert Comment

by:Mike
ID: 39221665
Yes. I understand that. There are instructions in the PDF to do that as well
0
 
LVL 38

Expert Comment

by:hdhondt
ID: 39221718
@FireRunt

The document you provided only talks about cloning a WJA installation. What deckdee wants to do is to clone a printer.

I know that Xerox CentreWareWeb can do that - but I don't know if it will do it with non-Xerox printers. All its other functions work with any SNMP compatible printer, so I assume cloning will, too. Of course, if you only need to clone one printer, it may be quicker to do it manually than to install CWW to try it. On the other hand, I like CWW for its clean user interface, so you may want to have a look at it anyway.
0
 

Author Closing Comment

by:deckydee
ID: 39829057
None of these answers were truly what I wanted.    As I said:

'I am looking for the option to clone/backup the MFP and restore this config onto another MFP'

It can be done with devices from Xerox.  I was looking for the same option in Jetdirect
0

Featured Post

Plug and play, no additional software required!

The ATEN UE3310 USB3.1 Gen1 Extender Cable allows users to extend the distance between the computer and USB devices up to 10 m (33 ft). The UE3310 is a high-quality, cost-effective solution for professional environments such as hospitals, factories and business facilities.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

During and after that shift to cloud, one area that still poses a struggle for many organizations is what to do with their department file shares.
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses
Course of the Month9 days, 19 hours left to enroll

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question