Mapping iSCSI connections for Xen Servers

I am setting up a new Farm and have HPBL460c G8 blades.  I have configured the Shared uplink sets for iSCSI traffic and assigned them to the server profiles.  On the physical blade, I only see the two NICS that I setup for the management network, not the iSCSI NICs.  When I look under the NICS tab in XenCenter, I see 8 NICS, but only the two management are connected.  

Can anyone point me in the right direction for setting up the two iSCSI connections?  Is it within the actual blade, or is it something in XenCenter?

Thanks so much!
SUS-ISCSI.PNG
XenCenter-NICS.PNG
madsnookerAsked:
Who is Participating?
 
vmwarun - ArunCommented:
The number of uplinks in the interconnect have been logically split in the blade, which is why you see multiple NICs. I hope that this is the first XenServer you are setting up. Make sure that the number of NICs on each XenServer host is identical.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.