Solved

See consistenet SRV warning with 2012 on windows server, why?

Posted on 2013-06-05
2
676 Views
Last Modified: 2013-06-06
This is using Windows 2008 server. 2 network cards were being TEAMED. Recently, there is a large amount of SRV warning events as follows:

  Source: srv
  Event ID: 2012
 
  Descriptions:
  Whilt transmitting and receiving data, the server encountered a network error. Occasional errors are expected, but large amount of these indicates a possible error on your network configuration. The error status code is contained in the returned data (formatted as word) and may points you towards to problem.

The 2 NICs are Broadcom BCM5716c NetXtreme GigE II. They formed a Team by using Broadcom advanced suite 3. What went wrong? Do I have to update driver or else?

thanks in advance.
0
Comment
Question by:MezzutOzil
2 Comments
 
LVL 13

Accepted Solution

by:
Jaihunt earned 500 total points
ID: 39221717
Hi

Remove the teaming and update the drivers and reconfigure the teaming

http://www.chicagotech.net/troubleshooting/eventid2012.htm

also check

http://support.microsoft.com/kb/951037

Thanks
Jai
0
 

Author Closing Comment

by:MezzutOzil
ID: 39227925
ok
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
The recent Microsoft changes on update philosophy for Windows pre-10 and their impact on existing WSUS implementations.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question