Solved

Terminal Services Regional Settings

Posted on 2013-06-06
3
811 Views
Last Modified: 2013-06-13
we are having an issue with our windows 208 r2 terminal services. We have an office in the UK and 2 offices here in the US. The UK regional setting are fine but the 2 US offices keep getting the UK date format.  The 2 servers are clustered and located here in the US. I have tried creating a group policy to force the users here in the US to use  our regional settings under User Config - Pref - Control Panel - Regional Options but no luck. What am I missing.

Any help or ideas would be great!

Thanks
Ed
0
Comment
Question by:FennerIT
  • 2
3 Comments
 
LVL 19

Assisted Solution

by:strivoli
strivoli earned 500 total points
ID: 39227176
You created the GPO. Did you check (using GPRESULT or RSoP) if the GPO is applied?
0
 

Author Comment

by:FennerIT
ID: 39230125
Yes it is showing up in the GPRESULT....The problem is we are using a cluster services and all three offices are using the cluster that is where our problem lays.

Any other suggestions?
0
 
LVL 19

Accepted Solution

by:
strivoli earned 500 total points
ID: 39230332
You should have one policy (call it UK policy) that sets the regional settings for the UK users (call them UK users) and another policy (US policy) that sets the regional settings for the US users.
Is you run a cluster or a single server, that makes no difference. The servers can be located anywhere.
Can you confirm that:
a. only the UK policy (NOT UK+US) is applied to UK users, and
b. only the US policy (NOT US+UK) is applied to US users, and
c. the 2 policies are different from each other
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration of the Data Protection Manager product. Note that this demonstration was prepared on the basis of Windows OS is 2008 R2 and DPM 2010. DATA PROTECTI…
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through configuring a drive on a Windows Server 2008 to perform shadow copies in order to quickly recover deleted files and folders. Click on Start and then select Computer to view the available drives on the se…

929 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now