Solved

VMware Guest Cant be pinged from Host.

Posted on 2013-06-08
6
770 Views
Last Modified: 2013-06-14
I have a fresh install of vmware workstation 8 on my Windows 7 x64 machine. I'm running a server 2008 R2 guest.

I have the networking set to bridged on vmware, however while I can browse the internet on the guest, and I can ping my router from the guest, I cannot ping the guest from the host.

I have windows firewall off on both the guest and host.

Any ideas whats going wrong?
0
Comment
Question by:ritterskampj
6 Comments
 
LVL 16

Expert Comment

by:Shaik M. Sajid
ID: 39231280
check the firewall on Router
0
 
LVL 119
ID: 39231435
just check, and toggle between NAT and Bridged and see if it resets?
0
 
LVL 13

Expert Comment

by:Sandy
ID: 39231697
check reverse NAT config in VMWARE

Cheers,
SA
0
Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

 

Author Comment

by:ritterskampj
ID: 39231955
Tried all of the above, no luck.
0
 

Accepted Solution

by:
ritterskampj earned 0 total points
ID: 39233533
I tried everything, re-installing vmware workstation, the network driver, the guest os, nothing worked. I finally re-installed my hosts OS and now it works, so I don't suppose I'll ever know for sure what the problem was.
0
 

Author Closing Comment

by:ritterskampj
ID: 39247008
Nothing worked, until I re-installed OS, and this was not really a solution...
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Is your company's data protection keeping pace with virtualization? Here are 7 dynamic ways to adapt to rapid breakthroughs in technology.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles to another domain controller. Log onto the new domain controller with a user account t…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question