Solved

teaming NICs, Virtual Switch/adapter in Windows 2012

Posted on 2013-06-08
2
799 Views
Last Modified: 2013-06-10
I initially created one Hypver-V guest in my windows 2012. But by that time, I just had to make it work asap, so I have been ignoring wrong settings that  I have to adjust now.

this server HP DL380 has 4 NICs. I created a team with 3 and left 1 for emergency access.

Ethernet#1, #2, #3 in Team - static IP 10.10.10.25
Ethernet#4 -dynamic (now assigned 10.10.10.205)

Then I created a hyver-v guest. I created virtual switch with 'external' to allow virtual guest to connect to physical network. (screenshots for these settings attached).

Then I assigned static IP to the guest,10.10.10.170

Now the problem occures in DNS. The host server(10.10.10.25) shows NetBT error telling below and when I looked at DNS, Forward Zone has only one entry for the server and reverse zone has two entries;

Event 4319

"A duplicate name has been detected on the TCP network.  The IP address of the computer that sent the message is in the data. Use nbtstat -n in a command window to see which name is in the Conflict state."


DNS Forward Zone:

FS1 -  10.10.10.205

DNS Reverse Zone:
10.10.10.205 - FS
10.10.10.25 - FS

Since 10.10.10.205 on the server is a single NIC connection with DHCP, I don't want traffic  to go to that, but it seems like DNS thinks it's the primary connection. Also, I'm not sure the hyper-v guest on the server is even using the teamed connection or the single connection. How do I resolve the error on the server and make sure DNS is properly configured for this environment and what to do make sure all traffic goes through the teamed NICs to take advantage of bandwidth pool?
0
Comment
Question by:crcsupport
2 Comments
 
LVL 22

Accepted Solution

by:
eeRoot earned 500 total points
ID: 39232109
Delete the incorrect DNS entries, you may have to do this on multiple DNS servers.  Then use the "ipconfig /flushdns" and "ipconfig /registerdns" to refresh DNS on machines getting this error.
0
 
LVL 1

Author Comment

by:crcsupport
ID: 39232182
I already have done that, but it happens again. The problem is FS1 has two IP addresses, one for Teamed network inteface with 3 NICs(10.10.10.25) and one for single NIC(10.10.10.205).

I rather think it's because I configured Hyper-v virtual switch incorrectly. What's the proper way to configure virtual switch and how to assign IP address for virtual host/guest, virtual switch, teamed NIC, and the single NIC(management)?
0

Featured Post

Problems using Powershell and Active Directory?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This is an issue that we can get adding / removing permissions in the vCSA 6.0. We can also have issues searching for users / groups in the AD (using your identify sources). This is how one of the ways to handle this issues and fix it.
Will try to explain how to use the VMware feature TAGs in the VMs and create Veeam Backup Jobs using TAGs. Since this article is too long, I will create second article for the Veeam tasks.
In this Micro Tutorial viewers will learn how they can get their files copied out from their unbootable system without need to use recovery services. As an example non-bootable Windows 2012R2 installation is used which has boot problems.
In this Micro Tutorial viewers will learn how to use Boot Corrector from Paragon Rescue Kit Free to identify and fix the boot problems of Windows 7/8/2012R2 etc. As an example is used Windows 2012R2 which lost its active partition flag (often happen…

680 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question