Port 3101

Posted on 2013-06-11
Last Modified: 2015-02-25

For my new BB server 10 configuration they asked as a pre-requisite , whether i can telnet to, & on port 443 & 3101. I can telnet to to port 443 but i cannot telnet to port 3101. What i shud do?

If i need to configure in firewall , please send me the complete command on how to do it. As i'm not that expert in firewall configuration, it would be better if i can get a step by step instruction.

Question by:skoshy123
  • 3
  • 2
LVL 10

Accepted Solution

Senthil Kumar earned 500 total points
ID: 39240679
Sample of Opening ports in Cisco ASA/PIX is mentioned in the below link

Author Comment

ID: 39240705

i can also get this doc from cisco. I need a step by step instruction on how to do the port opening for 3101 for Blackberry server.


LVL 10

Expert Comment

by:Senthil Kumar
ID: 39243657
Here you go

ciscoasa(config)#static (Inside,Outside)  netmask
ciscoasa(config)#access-list 100 extended permit tcp  any host  eq 3301
ciscoasa(config)#access-group 100 in interface outside

Hope this helps.

Author Comment

ID: 40630836

Author Comment

ID: 40630839
Thanks alot for your support

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Optimal Xbox 360 connectivity requires "OPEN NAT". If you use Juniper Netscreen or SSG firewall products in a home setting, the following steps will allow you get rid of the dreaded warning screen below and achieve the best online gaming environment…
This article assumes you have at least one Cisco ASA or PIX configured with working internet and a non-dynamic, public, address on the outside interface. If you need instructions on how to enable your device for internet, or basic configuration info…
This is a video that shows how the OnPage alerts system integrates into ConnectWise, how a trigger is set, how a page is sent via the trigger, and how the SENT, DELIVERED, READ & REPLIED receipts get entered into the internal tab of the ConnectWise …
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now