Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

How to show computer screen running at 1028x764 simultaneously on a much larger 2nd monitor but at high resolution and appearing exactly like it does on the primary monitor?

Posted on 2013-06-12
2
430 Views
Last Modified: 2013-06-12
I know I could use a projector to enlarge what is on my screen so an audience could see it.  What I really want is to get the same effect while using a wall mounted monitor and have the signal go directly from the computer to the wall mounted monitor.  Is this possible?  If yes, what hardware/software do I need?
0
Comment
Question by:jsgreiner
2 Comments
 
LVL 23

Accepted Solution

by:
tailoreddigital earned 500 total points
ID: 39242196
Using a dual display card, i.e,
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150655

Or a video port on a laptop,

Setup a Profile to handle the unique display configuration in a utility like,

Ultramon

Display Fusion
0
 
LVL 119
ID: 39242212
Using any modern graphics card, you can set the resolution independantly of both monitors, we have a wall connected to a graphics card (a very large wall) using two rear view projectors connected to two graphic ports, to do left and right, and then final connector connected to monitor.

Both AMD ATI and nVidia both have software which allows you to do this which ships with the graphic cards.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Recurring Excel Timelime for Veeam 2 94
VirtualBOX on GNS3 11 132
V2V Hyper-V RODC to ESXi 4 96
VMware ESXi Hypervisor 5.5 connecting the data stores on an Equal logic SAN 13 56
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
If your vDisk VHD file gets deleted from the image store accidentally or on purpose, you won't be able to remove the vDisk from the PVS console. There is a known workaround that is solid.
How to install and configure Citrix XenApp 6.5 - Part 1. In this video tutorial we have explained step by step installation of Citrix XenApp 6.5 Server on Windows Server 2008 R2 is explained in this video. We have explained the difference between…
In this video tutorial I show you the main steps to install and configure  a VMware ESXi6.0 server. The video has my comments as text on the screen and you can pause anytime when needed. Hope this will be helpful. Verify that your hardware and BIO…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question