Solved

BackupExec 2012 multi Backup copy to tape

Posted on 2013-06-14
2
1,526 Views
Last Modified: 2013-06-14
Hello,

in BackupExec 2012 I have to create a copy to tape job for each server, not like in 2010 where I was able to backup to disk and after all B2D are done copy the hole backups to the tape.

I configured BackupExec 2012 with a backup to tape at the end for each server backup.

I use a library and created a media set with 4 tapes for the backup from monday to thuesday, will I get a problem because the tape will be locked after the backup job from server one?
Or is BackupExec locking the Backupfiles on the tape instead of the tape itself?

How I have to configure the backup2tape for each job?
Can I use different lock times?

Greetings
0
Comment
Question by:Loki555
  • 2
2 Comments
 
LVL 22

Accepted Solution

by:
Haresh Nikumbh earned 500 total points
ID: 39247531
you can schedule all at a time but make sure  Concurrent write operation of that disk storage  is properly set

check below link

http://www.experts-exchange.com/Storage/Backup_Restore/Q_28156328.html

http://www.symantec.com/connect/forums/ready-no-idle-device-are-available-0#comment-7461571
0
 
LVL 22

Expert Comment

by:Haresh Nikumbh
ID: 39247556
How to back up multiple servers to a single series of tapes in Backup Exec 2012

http://www.symantec.com/business/support/index?page=content&id=TECH189306
0

Featured Post

Threat Intelligence Starter Resources

Integrating threat intelligence can be challenging, and not all companies are ready. These resources can help you build awareness and prepare for defense.

Join & Write a Comment

Life is full of imperfections – we all know it. Sometimes bad things happen to people for no particular reason. As they say: “it happens”. All we can do is to find a way to make some unavoidable situations… avoidable. Every kind of hardware has i…
Are you looking to recover an email message or a contact you just deleted mistakenly? Or you are searching for a contact that you erased from your MS Outlook ‘Contacts’ folder and now realized that it was important.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now