Solved

Cisco ASA 5505 port forwarding for CCTV Camera

Posted on 2013-06-16
1
1,681 Views
Last Modified: 2013-06-16
Hi all,

I have to forward outside request to my internal CCTV device for remote access.
CCTV DVR IP address : 192.168.0.150  
The system communicate over TCP UDP 6802 and http port
Did a few settings on Cisco ASA 5505 static nat rule and access rule but when i tested the system Cisco can't get any hit for 6802 port and no remote access for CCTV.
Any idea will be appreciated. I have attached 2 pictures.
2.jpg
1.jpg
0
Comment
Question by:ata1915
1 Comment
 
LVL 1

Accepted Solution

by:
ata1915 earned 0 total points
ID: 39251154
its okay now,  at the access rule source : any destination : my public ip solved the problem

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080b80d74.shtml
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Phishing is at the top of most security top 10 efforts you should be pursuing in 2016 and beyond. If you don't have phishing incorporated into your Security Awareness Program yet, now is the time. Phishers, and the scams they use, are only going to …
Examines three attack vectors, specifically, the different types of malware used in malicious attacks, web application attacks, and finally, network based attacks.  Concludes by examining the means of securing and protecting critical systems and inf…
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question