Want to win a PS4? Go Premium and enter to win our High-Tech Treats giveaway. Enter to Win

x
?
Solved

Juniper SRX220 Video Feed Bandwidth

Posted on 2013-06-17
5
Medium Priority
?
325 Views
Last Modified: 2013-07-02
Hello,

I have three MPLS circuits that have all been turned up.  

1 50 MB Texas
1 20 MB Toronto
1 20 MB Jerusalem

Both ends are terminated with Junipers SRX220. I have BGP setup for listening neighbors for each external IPs of CPEs.  The only traffic allowed comes from internal VLANS.

Texas - 10.0.104.X
Toronto - 10.0.102.X
Jerusalem - 10.0.103.X

MY BGP is setup to allow traffic from Vlans 102 and 104. We have a live video stream that sits on both of these circuits that broadcast as 12MBs. Everything was working fine until we brought Jerusalem online. We don't have an Juniper terminated in Israel but we have decoder than broadcast IP traffic all the time.

For some reason Toronto can ping Israel's external IP. I've put a block on Israel's external IP via security policy but somehow the traffic still comes through.

The feed gets distorted from Texas to Toronto whenever Israel is in play.  I'm thinking throttling maybe happening.

Is this case?
0
Comment
Question by:Greggor25
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
5 Comments
 
LVL 17

Expert Comment

by:pergr
ID: 39255298
I assume the video traffic is unicast.

Can you post the "show route" output from the routers?

Are you trying to send 12M from Texas to Toronto, plus another 12M from Jerusalem to Toronto?
0
 

Author Comment

by:Greggor25
ID: 39271414
Yes we are trying to send 13MB video from TX to Toronto and plus another 13MB to Israel from TX.

The video is unicast. I will post show routes later this afternoon.

After speaking with our ISP they think the circuit might be getting over utilized.  Even, if you QOS the traffic if the circuit is being over utilized it won't matter.
0
 

Author Comment

by:Greggor25
ID: 39276089
Pegr,

Attached is show route from both routers.
TorontoShowRoute.JPG
BedfordShowRoute.JPG
0
 

Accepted Solution

by:
Greggor25 earned 0 total points
ID: 39282936
Fixed issue was with mismatching duplex.
0
 

Author Closing Comment

by:Greggor25
ID: 39292573
Figured out this issue myself.
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses

610 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question