Solved

SBS 2011 Exchange 2010 Cannot load profile on second workstation

Posted on 2013-06-17
3
589 Views
Last Modified: 2013-06-20
I have installed an SBS 2011 Server and origionally setup two clients on Win XP workstations on Exchange Server 2010 - Outlook 2010 and it appears to work fine. I then replaced the workstation with a Win 7 box ( I have two Win7 boxes and both react the same) and tried to setup outlook 2010 on the new workstation. I get  "exchange 2010 cannot  open your default email folders you must connect to microsoft exchange with the current profile".

 I went looking and found an Event 2114 error
"Process STORE.EXE (PID=11404). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes"
I do not know how to address either error. Is the 2114 error causing my  Outlook problem??

Thanks,

Kent
0
Comment
Question by:KentMiller
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 22

Accepted Solution

by:
Larry Struckmeyer MVP earned 500 total points
ID: 39255763
Hi Kent:

I find two references to the issue you describe.  Can you verify that IPV6 has not been disabled on the SBS?  And if it is, try enabling it.

The other is here and appears to address the event log message:
http://blogs.technet.com/b/richardroddy/archive/2010/06/16/msexchange-adaccess-dsaccess-errors-and-the-manage-auditing-and-security-right.aspx
0
 

Author Comment

by:KentMiller
ID: 39260043
FL-Flyfishing,

Thanks for the post. I remoted in and found that IPV6 was not enabled. I enabled it on the server and then remoted into one of the workstations. It appears to have solved the problem. I will be at the location later today and will confirm on both workstations. I will let you know today.

THANKS
0
 

Author Comment

by:KentMiller
ID: 39264953
Enabling IPV6 took care of the problem. Any comment on why or how that solved the problem?


Thanks,  Kent
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
Know what services you can and cannot, should and should not combine on your server.
Windows 8 came with a dramatically different user interface known as Metro. Notably missing from that interface was a Start button and Start Menu. Microsoft responded to negative user feedback of the Metro interface, bringing back the Start button a…
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question