Solved

DHCP Server on GSM 7224 Layer 2/3 Switch - How to Configure

Posted on 2013-06-17
3
440 Views
Last Modified: 2013-06-23
I have filled up all the details through the web gui and Enabled the DHCP server on the switch. The LAN used is VLAN1. I also tried using VLAN 200. Nothing happens. Where Am I going wrong. THe dhcp pool config is attached.

DHCP Pool config
0
Comment
Question by:galaxyluv
  • 2
3 Comments
 
LVL 21

Expert Comment

by:eeRoot
ID: 39257967
Are there other switches on the network?  If so, they will need IP helper addresses configured to point traffic to this switch.  Also, if you set a static IP on a PC, can it then ping the switch that has DHCP running?
0
 

Accepted Solution

by:
galaxyluv earned 0 total points
ID: 39258190
I had it figured. The DHCP server started working. there was another DHCP server on WIN 2008 which I had to remove the role off and the DHCP on Netgear started to work. Thanks
0
 

Author Closing Comment

by:galaxyluv
ID: 39269118
I figured out this after search on the net.
0

Featured Post

Find Ransomware Secrets With All-Source Analysis

Ransomware has become a major concern for organizations; its prevalence has grown due to past successes achieved by threat actors. While each ransomware variant is different, we’ve seen some common tactics and trends used among the authors of the malware.

Join & Write a Comment

The worst thing when starting a new job is when the previous Network Administrator left behind no documentation. How do you get into the devices? If you've been in this situation or just accidently mistyped your password, this article will hopefully…
I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
This video discusses moving either the default database or any database to a new volume.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now