Solved

Event ID 1153 and 1154 Voltage sensor

Posted on 2013-06-20
4
817 Views
Last Modified: 2016-11-23
Hello,
I have a Dell PowerVault 745N that has started giving me errors.
My Event viewer / System is starting to fill up with Event ID 1153 and 1154. I do not have any peripherals attached. Full event ids below.
Any help would be appreciated

Thank you


Event Type:      Error
Event Source:      Server Administrator
Event Category:      None
Event ID:      1154
Date:            6/20/2013
Time:            5:09:05 PM
User:            N/A
Computer:      
Description:
Voltage sensor detected a failure value
Sensor location: Battery Voltage
Chassis location: Main System Chassis
Previous state was: Non-Critical (Warning)
Voltage sensor value (in Volts): 2.688


Event Type:      Warning
Event Source:      Server Administrator
Event Category:      None
Event ID:      1153
Date:            6/20/2013
Time:            5:09:11 PM
User:            N/A
Computer:      
Description:
Voltage sensor detected a warning value
Sensor location: Battery Voltage
Chassis location: Main System Chassis
Previous state was: Critical (Failed)
Voltage sensor value (in Volts): 2.704
0
Comment
Question by:sohomyriad
4 Comments
 
LVL 11

Accepted Solution

by:
Manjunath Sullad earned 500 total points
ID: 39264552
Hi,

This problem could be caused by the version of Open Manage software being used.

If you have new version of Open Manage version software loaded, it will cause the system to give these invalid error messages (Event ID 1154).

To verify this, run the Utility mode diagnostics, run all tests, extended, and verify that the machine passes all tests.

If so, roll back the Open Manage software to the previous version and this error should stop occurring and filling your system log.

Regards,
~ Manju
0
 

Author Comment

by:sohomyriad
ID: 39265817
Thank you Manju...I shall run the diags and let you know my findings.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Exchange 2013 event logs 1 64
Upgrading server RAID storage and RAID Controller 13 66
Dell R710 raid config 9 56
Server 2016 Configuration 7 48
I have purchased two new systems and both are now Universal Extensible Firmware Interface (UEFI) based. UEFI is replacing BIOS for the desktop PC. It is a Linux based firmware with enough robustness it can communicate with a website without loading …
Microsoft Active Directory, the widely used IT infrastructure, is known for its high risk of credential theft. The best way to test your Active Directory’s vulnerabilities to pass-the-ticket, pass-the-hash, privilege escalation, and malware attacks …

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question