?
Solved

install rac

Posted on 2013-06-23
4
Medium Priority
?
451 Views
Last Modified: 2013-06-27
I use the following link to install rac
http://dnccfg.blogspot.com/2012/09/koracle11gr2racsetup.html

I did all the steps until the grid installation in node1 ie, rc1

In the second node..

I did every thing
shared storage and shared disk only in node 1

I am seeing this error

in the node2 ie rc2

please help...

why it is failing?

[root@rc2 Desktop]# rpm -qa|grep oracleasm
oracleasm-2.6.18-53.el5-2.0.4-1.el5
oracleasm-support-2.1.8-1.el5
oracleasmlib-2.0.4-1.el5
[root@rc2 Desktop]# /sbin/partprobe
Warning: Unable to open /dev/hdc read-write (Read-only file system).  /dev/hdc has been opened read-only.
[root@rc2 Desktop]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the Oracle ASM library
driver.  The following questions will determine whether the driver is
loaded on boot and what permissions it will have.  The current values
will be shown in brackets ('[]').  Hitting <ENTER> without typing an
answer will keep that current value.  Ctrl-C will abort.

Default user to own the driver interface []: grid
Default group to own the driver interface []: asmdba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver:                     [FAILED]
[root@rc2 Desktop]# rpm -ivh oracleasmlib-2.0.4-1.el5.i386.rpm
warning: oracleasmlib-2.0.4-1.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing...                ########################################### [100%]
        package oracleasmlib-2.0.4-1.el5 is already installed
[root@rc2 Desktop]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the Oracle ASM library
driver.  The following questions will determine whether the driver is
loaded on boot and what permissions it will have.  The current values
will be shown in brackets ('[]').  Hitting <ENTER> without typing an
answer will keep that current value.  Ctrl-C will abort.

Default user to own the driver interface [grid]:
Default group to own the driver interface [asmdba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver:                     [FAILED]
[root@rc2 Desktop]#
0
Comment
Question by:walkerdba
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 

Author Comment

by:walkerdba
ID: 39277339
no replies
0
 
LVL 35

Accepted Solution

by:
YZlat earned 2000 total points
ID: 39282078
0
 

Author Comment

by:walkerdba
ID: 39282738
wow! Thanks
0
 

Author Closing Comment

by:walkerdba
ID: 39282739
May God bless you..
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Truncate is a DDL Command where as Delete is a DML Command. Both will delete data from table, but what is the difference between these below statements truncate table <table_name> ?? delete from <table_name> ?? The first command cannot be …
Working with Network Access Control Lists in Oracle 11g (part 2) Part 1: http://www.e-e.com/A_8429.html Previously, I introduced the basics of network ACL's including how to create, delete and modify entries to allow and deny access.  For many…
This video shows how to recover a database from a user managed backup
This video explains what a user managed backup is and shows how to take one, providing a couple of simple example scripts.
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question