?
Solved

CISCO IP PHONE 7911G Display Problem

Posted on 2013-06-23
1
Medium Priority
?
310 Views
Last Modified: 2013-07-10
CISCO IP PHONE Display is not comming after resetting it to Factory Default Factory Settings.
0
Comment
Question by:ops ahaa
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 20

Accepted Solution

by:
José Méndez earned 1500 total points
ID: 39270922
This is most likely caused due to a DHCP issue. The IP PHone will not boot because it needs a TFTP where to obtain its firmware code, and to do this it must first obtain IP Settings that include a valid TFTP Address where to point at. You can try this procedure:

https://supportforums.cisco.com/docs/DOC-23730

But, still, one step back is the DHCP offering of a TFTP server where you can point to, then you can apply the procedure.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

So you think no one can listen in on your VOIP conversations, eh? Well... if you haven't setup Secure Real Time Transport (SRTP), your voice communications can be hacked into by just about anyone! First, let's talk about the intended audience for…
There are no good configuration guides for HP-H3C router to LYNC on the web. :( Big statement, but we havent been able to find one yet. We did find the following document useful, but the information was not enough to use H3C router for use as a L…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question