Solved

Enable Windows Media Service HTTP Server Control Protocol From Batch File

Posted on 2013-06-24
6
537 Views
Last Modified: 2013-08-28
I have a server that keeps disabling the Windows Media Service HTTP Server Control Protocol when it reboots.  I would like to make a batch file to check/enable this after reboot.  But I cannot seem to find the correct command to do this from command line.
0
Comment
Question by:Sitewizard
  • 3
  • 3
6 Comments
 
LVL 3

Accepted Solution

by:
redmondChris earned 500 total points
ID: 39286280
Hi sitewizard,

Folks from the Microsoft team ought to be able to assist. Just post your question on http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winservermedia.

-Chris
0
 

Author Comment

by:Sitewizard
ID: 39405561
I've requested that this question be deleted for the following reason:

No answer given the only response was to go to microsoft
0
 

Author Closing Comment

by:Sitewizard
ID: 39405562
simply a link to microsoft, not an answer
0
Are your AD admin tools letting you down?

Managing Active Directory can get complicated.  Often, the native tools for managing AD are just not up to the task.  The largest Active Directory installations in the world have relied on one tool to manage their day-to-day administration tasks: Hyena. Start your trial today.

 
LVL 3

Expert Comment

by:redmondChris
ID: 39406327
Fair enough. Out of curiosity, did you go to the Windows Media community forum and ask the question? (The team that staffs it are long-time Windows Media experts at Microsoft.) More importantly, did you find an answer to your question?

-Chris
0
 

Author Comment

by:Sitewizard
ID: 39414779
currently have not found a viable answer for this.  I have basically written a small windows service that can check and alert me if it is not up.  but as for accessing it directly and enabling no.
0
 
LVL 3

Expert Comment

by:redmondChris
ID: 39447852
You seemed reluctant to ask the Microsoft team, so I went ahead and asked them. Here is their reply:

"If something is turning off port 80 for Windows Media Services (WMS), then that same something should prevent a script from turning the port back on for WMS.  I’m assuming from this description that this is a classic port conflict issue with something like IIS or another port 80 consumer." [Note that if a port conflict seems possible, this article on WMS port conflicts might be helpful: http://www.iis.net/learn/media/windows-media-services/using-http-for-streaming-and-downloading-from-the-same-computer.]

"Finding the underlying cause of this issue makes more sense than writing a script to fix this.  But, if they’re dead set on writing a script, then here are the starting APIs:  http://msdn.microsoft.com/en-us/library/windows/desktop/dd893168(v=vs.85).aspx."

I hope this helps...

-Chris
0

Featured Post

Networking for the Cloud Era

Join Microsoft and Riverbed for a discussion and demonstration of enhancements to SteelConnect:
-One-click orchestration and cloud connectivity in Azure environments
-Tight integration of SD-WAN and WAN optimization capabilities
-Scalability and resiliency equal to a data center

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

The password reset disk is often mentioned as the best solution to deal with the lost Windows password problem. In Windows 2008, 7, Vista and XP, a password reset disk can be easily created. But besides Windows 7/Vista/XP, Windows Server 2008 and ot…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through setting the global and backup job media overwrite and protection periods in Backup Exec 2012. Log onto the Backup Exec Central Administration Server. Examine the services. If all or most of them are stop…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question