Solved

Accessing WAP54G admin page when connect to ISP modem

Posted on 2013-06-24
2
367 Views
Last Modified: 2013-06-28
Hi,

I have a WAP54G.  I can set my PC with IP 192.168.1.1, and connect to the WAP54G to access the admin page.

When I go back to auto IP for the PC, and connect the WAP54G to my ISP modem, I get access to the Internet, but cannot access the WAP54G admin page.

Thanks
0
Comment
Question by:taborrg
2 Comments
 
LVL 3

Accepted Solution

by:
sbrozinick earned 500 total points
ID: 39273531
With your computer connected to the modem, put the modem into bridge mode.  In this mode the modem will be simply a bridge between the ISP and the WAP54G.  Once successfully in bridge mode your WAP54G will get a routable address therefore the WAN interfacte will not be 192.168.1.X or whatever internal scheme that the modem provided by default.

Then connect the WAP54G WAN to the modem and the computer to the LAN.  You may need to run ipconfig /release and ipconfig /renew on the computer to allow the computer to get a DHCP address (auto) from the WAR54G.
0
 
LVL 1

Author Closing Comment

by:taborrg
ID: 39285681
Thanks.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to disable the wireless network adapter card from BIOS in Win 10 20 101
Cisco Air AP 6 50
Wireless antenna advice/design 6 56
Minimum security requirements for WiFi in GPO 10 75
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question