Solved

esxi 4.1 host keeps getting during flush firmware configuration, fault.toomanywrties.summary

Posted on 2013-06-25
6
1,923 Views
Last Modified: 2013-07-01
I have 3 host but one is getting the error above and when the vm's are on it, I cant rdp to them
but as soon as I move them to another host I can rdp to them.
Any idea what this error is and why it keeps coming up on the host?
0
Comment
Question by:vmich
  • 4
  • 2
6 Comments
 
LVL 119
ID: 39277178
Is ESXi installed on a usb flash drive or sd card?

do you have VMware HA enabled?

VMware Tools installed in the VMs?

Is this the latest patched version of 4.1?
0
 
LVL 1

Author Comment

by:vmich
ID: 39277582
Now the error is gone but still when I move a vm to this one host which is in a cluster with 2 other host, I cant rdp to the vms or ping them...
Yes there is HA and VMware tools is installed on the vm that I am testing with and the host does have a sd card just like the other host.
0
 
LVL 119
ID: 39277631
if this host is setup the same as the other hosts, same hardware, I would escalate and log a support request with VMware.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 1

Author Comment

by:vmich
ID: 39277727
ok that's what I kinda of thought..
Thanks for the info and I will let you know what I find out..
0
 
LVL 1

Accepted Solution

by:
vmich earned 0 total points
ID: 39278484
Ok found out the issue was because some how one of the ports on the switch, that the host was connected to,it's config was changed by someone or something, and once it was setup they way it should have been, all worked just fine..
0
 
LVL 1

Author Closing Comment

by:vmich
ID: 39289383
solved
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

HOW TO: Connect to the VMware vSphere Hypervisor 6.5 (ESXi 6.5) using the vSphere (HTML5 Web) Host Client 6.5, and perform a simple configuration task of adding a new VMFS 6 datastore.
Veeam Backup & Replication has added a new integration – Veeam Backup for Microsoft Office 365.  In this blog, we will discuss how you can benefit from Office 365 email backup with the Veeam’s new product and try to shed some light on the needs and …
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…
This video shows you how easy it is to boot from ISO images for virtual machines with the ISO images stored on a local datastore on the ESXi host.

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question