Solved

Configure PPTP passtrough on ASA5510

Posted on 2013-06-25
3
337 Views
Last Modified: 2013-06-26
Hi Folks,

I need to connect to a PPTP VPN server outside our network. I want to connect from a Windows 2012 Server from the inside of my network, through a Cisco ASA 5510, to a cliënt site where the VPN server is running.

I found this website with some basic commands for the ASA. Will this do the trick for me?

http://www.petenetlive.com/KB/Article/0000009.htm

Any additional advise is welcome!
0
Comment
Question by:SvenIA
3 Comments
 
LVL 6

Expert Comment

by:Vijay Pratap Singh
ID: 39277176
0
 
LVL 20

Accepted Solution

by:
rauenpc earned 500 total points
ID: 39277818
If you just need to be able to connect from the inside to an outside source via pptp, the link you posted will get the trick done. You most likely won't need to do the ACL portion, just the global policy part. The ACL part is only necessary if there is already an outbound acl in place that would block that type of traffic, but most people only need to add pptp to the global inspection policy.
0
 
LVL 7

Author Closing Comment

by:SvenIA
ID: 39277927
I got it working with the info on the site!

Thanks for the help!
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
anyconnect password change 2 32
Cisco Supervisor upgrade to 2T 3 47
No RSTP between switches 3 46
Adding VPN user with Cisco RV110W changes IP address 7 24
Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

27 Experts available now in Live!

Get 1:1 Help Now