Solved

CISCO 2960 USB

Posted on 2013-06-26
1
1,223 Views
Last Modified: 2013-07-10
Is it possible to upload a configuration file to a Cisco 2960-S Switch using the USB adapter??
0
Comment
Question by:sectel
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 18

Accepted Solution

by:
Garry Glendown earned 500 total points
ID: 39280324
Which USB are you talking about? On the USB console port (the one marked with the blue line), no, it is a pure serial port with no file transfer capability (apart from cut&paste). There is second USB port, though, left of the console port. It will allow you to copy a config file from a USB stick to your startup config with something like this:

copy usbflash0:myconfig.txt startup-config
0

Featured Post

[Webinar] How Hackers Steal Your Credentials

Do You Know How Hackers Steal Your Credentials? Join us and Skyport Systems to learn how hackers steal your credentials and why Active Directory must be secure to stop them. Thursday, July 13, 2017 10:00 A.M. PDT

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question