Solved

Random disconnects from server/network drives

Posted on 2013-06-27
7
1,309 Views
Last Modified: 2013-06-28
Getting random disconnects from network drives, but not from Internet.

Turned off power management for NIC and even replaced NIC to still have issue.

Checked EventViewer for errors and there are two errors repeating:

NETLOGON
Error ID 5719
This computer was not able to set up a secure session with a domain controller
in domain TITLEMARK due to the following:
%%1311

AND

Mirosoft-Windows-GroupPolicy
Error ID 1054
The processing of Group Policy failed. Windows could not obtain the name of a
domain controller. This could be caused by a name resolution failure. Verify
your Domain Name System (DNS) is configured and working correctly.


This is the only machine to be having this problem. Ran a scan on the network and there are no IP address conflicts. Machine has been on the domain for over 18months without issue. Machine is running on Windows 7 Pro and server is SBS 2011
0
Comment
Question by:SBSWIZARD
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 3
7 Comments
 
LVL 30

Expert Comment

by:ded9
ID: 39281526
Close all apps and then run this fixit


http://support.microsoft.com/kb/297684


Restart system and check.




Ded9
0
 

Author Comment

by:SBSWIZARD
ID: 39281622
Applied. Will wait to see if this resolves the issue.
0
 

Author Comment

by:SBSWIZARD
ID: 39281758
The above fix did not work; user is still getting the disconnects.
0
Instantly Create Instructional Tutorials

Contextual Guidance at the moment of need helps your employees adopt to new software or processes instantly. Boost knowledge retention and employee engagement step-by-step with one easy solution.

 
LVL 30

Assisted Solution

by:ded9
ded9 earned 500 total points
ID: 39281781
Try clean boot.

Clean boot process

Start-type - msconfig- click on startup tab- click disable all...then click services tab- put a check on hide all microsoft services ...and then click disable all....click ok and then restart the computer in normal mode.

If everything works fine in clean boot then enable five startup items and services at a time to find the faulty software.




Ded9
0
 

Author Comment

by:SBSWIZARD
ID: 39284863
Didnt work.Still having the issue.
0
 
LVL 30

Accepted Solution

by:
ded9 earned 500 total points
ID: 39285028
To check whether its a profile related issue ... login as administrator and map drives and check whether they are getting disconnected.

If the drives are not getting disconnected then rename the local user account(in registry too) . Reboot and let the user login.




Ded9
0
 

Author Comment

by:SBSWIZARD
ID: 39285325
Found it may be related to a program. User said it would disconnect with the program opened or closed, but for kicks I had her not open the program all day and she hasnt lost the connection.

Thanks for all the help.
0

Featured Post

Resolve Critical IT Incidents Fast

If your data, services or processes become compromised, your organization can suffer damage in just minutes and how fast you communicate during a major IT incident is everything. Learn how to immediately identify incidents & best practices to resolve them quickly and effectively.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
SBS 2011 RAM Upgrade 4 37
Random empty folders on my backup drive?? 10 80
SBS 2008 active sync issue 2 50
Windows 7 - Removing Pending Updates via DISM 8 13
When you start your Windows 10 PC and got an "Operating system not found" error or just saw  "Auto repair for startup" or a blinking cursor with black screen. A loop for Auto repair will start but fix nothing.  You will be panic as there are no back…
While working, an annoying popup showing below will come and we cannot cancel or close it form the screen. The error message will come again and again.
In this video, we discuss why the need for additional vertical screen space has become more important in recent years, namely, due to the transition in the marketplace of 4x3 computer screens to 16x9 and 16x10 screens (so-called widescreen format). …
This Micro Tutorial will give you a introduction in two parts how to utilize Windows Live Movie Maker to its maximum editing capability. This will be demonstrated using Windows Live Movie Maker on Windows 7 operating system.

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question